1 / 2
Test tube vasemode vase
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vasemode print to hold 10 test tubes. The test tubes it was designed for are 11.8mm by 100mm long.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 2
- Views
- 399
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
After printing you will need to apply a little force to get the test tubes it. They fit pretty snugly.
You can print this not in vase mode but you might have to scale it up a couple percent as to get them to fit as a solid print wont have the flexibility of a vase mode print
If you have different sized test tubes you can scale this accordingly. For example:
- 10mm test tubes 10/11.8 = 85%
- 13mm test tubes 13/11.8 = 110%
- 16mm test tubes 16/11.8 = 135.6%
- 20mm test tubes 20/11.8 = 169.5%
I designed this to be printed with the following settings:
- .6 nozzle
- vase mode
- .2 layer height