Snap-on bracket with tactile switch for Malolo's snap fit Raspberry Pi 3 Case (OctoPrint GPIO shutdown button)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An add-on to Malolo's snap fit Raspberry Pi 3B case: a bracket between HMDI and GPIO-header, holding a tactile switch.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I am using OctoPrints plugin 'GPIO Shutdown', for that a separate button is used to turn off OctoPrint.
Since the Raspberry Pi (3B+) is fixed to the frame of my printer and I didn't want a loose swinging button, I made a frame that is clamped between the GPIO header and the HDMI output of Malolo's enclosure. The first and last 6 GPIO rows are still free to use.
Inside the holder is a 'tactile switch', in front of the switch an extra printed button. The button and bracket are sufficiently secure.
The PCB needs supports, I have turned off the supports inside the GPIO header.
Please note: the photos do not reflect the exact quality of the design, the first layers did not come out of the printer very well. I will photograph and upload a better print in due course.
Resources:
Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case
https://www.printables.com/model/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b
Tactile switch Panel Mount by morecat_lab
https://www.thingiverse.com/thing:4138312