Rugged and Discrete AirTag Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A discrete AirTag case.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This is a rugged and discrete AirTag case. Great for putting into your luggage, in a backpack, under a car seat, etc.
I used a cable style keyring such as these https://a.co/d/afOPQ5t.
I found that the 6.5" (165mm) cables work the best.
If the case is printed using a high infill (in my case I used 40%) it will be very strong, even using PLA.
The screws I used were 3mm x 10mm.
Hopefully something like this, especially if attached to something difficult to cut, will deter a would-be thief. It will be difficult to just pull off. And I don't know of many thieves that go around with a 2.5mm allen wrench in their pocket.