Ply-bird with levitating wing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ply-bird is a skeletonized bird sculpture with a magnetic levitating wing
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ply-bird is a skeletonized bird sculpture with a wing that levitates with the help of magnets, and a small length of fishing line
The original bird was inspired by the remaining scraps from a plywood project, hens the name Ply-bird
Hardware:
4 or 5 5x3mm magnets and 2 lengths of 50mm fishing line (the thinner the better) is needed to complete the build
The magnets has been given a 0.15mm clearance, depending on your printer, the magnets may become loss, in that case, adding a drop of glue is always an option
To fix the wing Tie a large nut on both fishing lines and feed them up the large hole in the bottom of the wing and pull them towards the small slot as shown. feed the lines thru the hole in the body, adjust the length to level the wing. and tie a nut on that end to
Update:
Added split body file for easier multicolor print.