Minecraft Steve Posable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ball-and-socket articulated version of Minecraft Steve.
- Rating
- 4.5 / 5
- Likes
- 51
- Downloads
- 567
- Makes
- 2
- Views
- 2,027
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Update: This was designed for an original Ender3, if you have a newer printer like something from BambuLabs you will need to expand XY by 0.1mm (X-Y contour = 0.1)
Having printed many different versions of Minecraft Steve and most of them either break when putting together or are very loose, I made a ball-and-socket version. Both the body and limbs have socket joints so there is more range of movement. I am including all of the individual pieces and a group ready to print version. The sockets are print in place and assumes your printer can do a 9mm bridge, it also is pre-supported and inserting a ball joint part will free up the socket. The sockets are printed flat so should be fairly strong and if the joint is too loose with a smaller nozzle, maybe add 0.1mm XY/horizontal expansion to just the ball joint parts.
My print settings, 0.6mm nozzle, 0.2mm layer height, 30mm/s speed, 3 walls. Comes out to 21 grams of PLA and 2 hours on an Ender3 using Cura Slicer.