1 / 11
Dyson Supersonic Hangerclamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this hangerclamp, the Dyson Supersonic can be hung from any hook.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need some additional hardware: 1x M3x12 button head screw and an M3S Ruthex insert. One of the holes in the hangerclamp is a little bit larger than the other. The insert should be inserted with a soldering iron or similar into the larger ole from the outside towards the smaller hole.
The hangerclamp can be positioned anywhere along the upper cylindrical part of the hairdryer.
Can be printed from any filament with a little bit of flex, e.g. PETG or ABS. I printed mine with ABS.