1 / 4
Drill Adaptor from ±12.4mm to 10mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adaptor for my step drill to allow it to fit in my chuck which can only take up to 10 mm drills.
- Rating
- 1 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 129
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an adaptor for my step drill to allow it to fit in my chuck which can only take up to 10 mm drills.
I would print with 100% infill and 0.2mm on a 0.4 mm nozzle, then cleanup the edges.
Makes use of two M3x5mm bolts
Im unsure how it will hold up over-time or when used for drilling into hard surfaces like metals or hardwoods. Has worked for me in plastic and soft-woods.
There are two versions. 0.4 is smaller and 0.5 has thicker walls and is a bit longer.