1 / 3
Foxalien Masuter Pro 450mm X axis Limit switch mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple plate to move the microswitch limit switch on the masuter Pro outwards
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 57
- Makes
- 0
- Views
- 643
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A simple plate to move the microswitch limit switch on the masuter Pro outwards. This allows the end plates to be used as bump stops and in combination with altering the x belt retainer as per images - you can gain 50-55mm in X movement.
You will need a few bits of hardware - some additional screws and a new longer X belt.
Print in PETG 0.28mm is fine..