Belt Driven CR10 V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of KevinAkaSam belt conversion for the CR10 V2 and CR10 V3.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 35
- Makes
- 0
- Views
- 619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This remix allows to use the factory Z braces of the CR10 V2/CR10 V3 while upgrading to a belted driven Z axis. The transmissions are modified to match the bolt pattern from the top brace bracket.
THIS REQUIRES LONGER SHAFTS THAN THE ORIGINAL BOM
I went with 100mm and it is perfect.
Note that it is not the only modification needed for the CR10 V2 if you want to use the KevinAkaSam system since the left plate (where the extruder usually sits) won't have the required pattern to fit the OEM breakout board. I did not design it because I am now direct drive with a toolhead CANbus board.
Please use the instructions from KevinAkaSam for assembly, it is the exact same process.