1 / 2
Key for beiter plunger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Key for tightening the beiter archery plunger. This key is thinner than the original.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 228
- Makes
- 3
- Views
- 618
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a key for tightening the beiter plunger on your riser. Sometimes the space between the nut and the spring case isn't enough to fit the original key, so I decided to make my own!
Cool adition to the original key it has a hole so you can kary it as a key chain on your quiver!
I recommend printing it at 100% as it will be stronger but you can also try it at 80% in gyroid infill.
You can use wathever filament you wish except of course, flexible ones.
It takes about 1h to print with slow slicer settings.