Plant Climber Infinity Assembler + Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.07 – €7.42 net (excluding VAT)
For file: plant_wall_spacer_v2_0.6n_0.35mm_PLA_MK3S_4h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.75 excluding VAT (range midpoint).
- Weight reported by the author
- 135 g
- Print time reported by the author
- 4.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A system to assemble moss pole together to create Skyscrapers for vines !
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 23
- Makes
- 0
- Views
- 1,434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
⚒ No 3D printer? No time to source components?
I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop
So, I got a new plant for the stairway at home and needed a 4m moss pole. Since it didn't exist, here we are…
Now, we have a system to assemble moss poles together and secure them to the wall. The design aims to be as flexible as possible (within the constraints of my home).
Printing Details:
1 or more links: Print flat with supports.
1 or more wall mounts: Print on the flat face; no support needed.
Spacers: Print as many as required. Each spacer is 1 cm high; print flat without support.
Hardware:
Multiple MOSS POLES!
Screws for the wall mounts.
Zip ties to secure the poles to the wall mounts (see pictures).
BBQ spikes to connect the moss poles together.
Assembly Instructions:
Links:
Print all pieces.
Insert BBQ spikes into the link pieces.
Add spacers if needed.
Force-fit the moss pole onto the links, but remember to cut your moss pole to the desired size first (see picture).
Insert the BBQ spikes into the moss pole below (see picture).
Wall Mount:
Install the wall mounts onto the wall.
Optionally, wrap some coco fiber around before securing.
Use zip ties to attach your Moss Pole Skyscraper to the wall mounts through the provided inserts.
Hope this helps!
By the way, the lamp you see in the photo is also available! Here are the files !  |