1 / 12
6in, 8in, 10in, 12in, 13in, and 14in Tunable Drums  with accesssories — image 1
1 / 12

6in, 8in, 10in, 12in, 13in, and 14in Tunable Drums with accesssories

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws with 3d printed accessories.

Rating
4.25 / 5
Likes
140
Downloads
688
Makes
4
Views
4,602
Reviews
4

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial — Share Alike

I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements

Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws.

 

This was modeled in Fusion 360.

I have included three sizes (6",8", and 10") they all use the same size screw (10-32 x 1-½")

I would recommend pre-threading the screws before putting the head on. And when tuning be sure to work in a star pattern to evenly tension the rim.

Drum heads were ordered from Sweetwater.  I'm thinking about getting a set of mesh heads for silent practice.

Accessories so far include…

     -Snare Attachment for 6 in drum

     -Cymbal Attachment for 8 in drum

      -Tri-Tom holder for Three 6in drums

      -Tri-Tom holder for 6, 8, and 10 in drums

 

 

Here is a link for TPU drumheads https://www.printables.com/model/1216377-tpu-drum-head-or-frisbee

Please feel free to suggest any other changes or options you would like to see!!!

 

Here are my basic settings.

Filament: Hatchbox Carbon-fiber PLA (currently sold out)

I printed my 6" drum using Sunlu Carbon-fiber PLA (Similar Quality)

I also printed a test shell in regular PLA and it feels just as strong as the Carbon-fiber.

Layer Height: 0.28mm

Perimeters: 4

Infill: 10%

No Raft or Brims

Sliced with Pursa Slicer

Printed on Creality CR-10 on a Glass Bed

The accessories are printed with the same settings but with regular PLA.

 

Update 7/20/23

I have added 12-inch 13-inch and 14-inch drums.  

I have also added a Marching Tenors Assembly accessory. This allows you to connect 5 drums in a Marching Tenor configuration.  (6in, 8in, 10in, 12in, 13in.)  I don't have a printer to print the larger drums but maybe someone out there can test this for me while I save up and purchase a larger printer?

Below is a rendering of the assembled parts the bars will need to be glued into the connection pieces.  Then the drums should fit in the slots.

Tags