1 / 1
Journey to Infinity Homestead Prop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:50 Scale model of Homestead's Journey to Infinity 2023 Winter Percussion Prop.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
To print, separate the bodies in the STL into:
- Bird
- Side Panels (2 x L shaped pieces)
- Skinny Base (with small stairs)
- Large Base (with large stairs)
- Trampoline
You will also need 1.5mm (1/16") brass or stainless steel rod, cut to about 3". Optional are round toothpicks for the “full alignment experience.”
Orientation for print:
- Bird: flat side down
- Side Panels: vertically – on its L end. Slot and holes vertical.
- Skinny Base: stairs on top. (Diagonal supports are already included.)
- Large Base: on its side, with slot on top, stairs laying on print bed
- Trampoline: on its face, bumps on top.
In Prusa Slicer I used variable heights, but 0.30 layer height is ok.