Parametric Two Tone Flower Pot w/ Tray - No Filament Change
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Two Tone Plant Pot with a Tray. Filament change not required. Two pieces connect via groove and glue/acetone.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 60
- Makes
- 2
- Views
- 418
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Parametric Two Tone Plant Pot with a Tray. Parametric by height, width, and thickness.
Filament change not required and the two pieces connect with a groove. You can use glue but I use acetone to weld them together. I coated the inside with Mod Podge but unless you are really over watering it's probably not important.
STLs available for download are 140mm H x 170mm W x 2mm thick but can be scaled accordingly in your slicer. Print settings are largely unimportant.
I used Overture White PLA and Geeetech Wood PLA.