Wire Snippers Holder for Ikea Skadis Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach your wire snippers to your Ikea Skadis board.
- Rating
- 4.8 / 5
- Likes
- 47
- Downloads
- 182
- Makes
- 5
- Views
- 856
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I ordered a set of ARC-PEGLAGO panels for my P1P so I needed a way to attach things to it. This is the second model I've created so that I can attach wire snippers to the printer.
To attach the holder to the Skadis panel I used the excellent Skadis T-Nuts Mounting System. I've provided both the original M2 T-nuts and my own remix that uses heat set inserts.
You will need to print the snippers holder and one of the T-nuts of your choosing.
Required hardware
(1) M2 x 12-14mm socket head screws
(1) M2 nuts (if using the M2 nut version of the T-nuts)
(1) M2 x 3.0mm L x 3.6mm OD or (1) M2 x 4.0mm L x 3.6mm OD heat set inserts (if using the heat set version of the T-nuts)
* Some of the links above are Amazon Affiliate links