HSW Wall Mount Tesa Powerstrips/double-sided tape
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.29 – €0.35 net (excluding VAT)
For file: hsw-tesa-powerstrips-bracket_0.3mm_PETG_MINI_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 17.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use this to attach your Honeycomb Storage Wall to a flat wall without damaging it using e.g. TESA Powerstrips.
- Rating
- 5 / 5
- Likes
- 179
- Downloads
- 856
- Makes
- 4
- Views
- 4,214
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets
Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well, superglue if you're courageous (acetone might dissolve it later) 😉
Guide the pin through one of the ”hollow inserts” and fix it with the printed screw.
This model was designed with Python-SDF, code is here.