Flow Calibration Matrix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This .3mf file is already set up correctly to test your printer's flow.
- Rating
- 5 / 5
- Likes
- 62
- Downloads
- 1,136
- Makes
- 3
- Views
- 3,358
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The .3mf file is already set up correctly to test your printer's flow.
- You must enable brim to hold the pieces together (10 lines should be enouth) and preferably set line width to 0.4mm.
- You should obtain at least one box with the surface fully filled but without an excess of filament.
- If your print is well configured for your filament, you should get the best impression on the 9th box (1.00).
- See the correction factor image to see how much you need to change the flow of your print.
Example: if your best impression is on the 0.70 box, you must correct the flow to 70%.
Instructional video (in Portuguese - turn on subtitles if necessary) https://www.youtube.com/watch?v=nqgzjwpc9F8
The original file was taken from Jasmine's GitHub https://github.com/jasminemoreira/3D_printing/tree/master/Calibration_Matrix
Thanks to Jasmine Moreira! https://www.thingiverse.com/jasminemoreira/designs
Print Settings
- Rafts: No
- Supports: No
- Resolution: 0.12 or 0.2
- Infill: 0%
- Notes: I sliced this object using Ultimaker Cura
You can help me buy a beer! :)
Any amount would make me happy and extremely grateful.
PayPal: https://paypal.me/maurymmarques
Patreon: https://patreon.com/maurymmarques