Bambu Lab X1C Vibration Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vibration damping feet for the X1C might work on other models too can't say for sure.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 206
- Makes
- 1
- Views
- 2,408
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I could feel the X1C vibrations when putting my hand on the build plate of my E3S1P that is setting on the same desk. Knew this was going to be an issue if trying to print both at the same time. Had some TPU so I made some with it.
I printed them at 0.20mm layer height with 5 perimeters, 25% gyroid infill and set the top layers to 10 to give the printer a nice thick pad to sit on.
These work very well for me, at times I can still feel just a tab of vibration on the E3S1P but I don't think it's going to effect it when printing.