Samsung Galaxy S23 Ultra - mock-up
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this phone mock-up to conform a pocket to better fit a Samsung Galaxy S23 Ultra with a thicker case on it.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 0
- Views
- 2,154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
This mock-up is based on the size of my Samsung Galaxy S23 Ultra phone with a thicker Otterbox case. I made it because I have a pocket on a pair of jeans that normally fits my phone just fine, but was tighter than usual and would barely fit after a wash. I put this mock-up into the pocket whenever I wasn't wearing the jeans. After a total of a week or so spent in the pocket, there was plenty of room to slip my phone in like normal.
I printed it in Zyltech Green PETG on my MK3S+ using the following settings:
- .6mm nozzle
- .3mm layer height (.3mm “quality” preset in Prusaslicer for a MK3S+)
- 4 perimeters
- 10% gyroid infill
Obviously, you can use whatever settings you like. These are just what I used and they worked fine. Also, I printed this first one with the name side down on build plate. If I print more I'll probably print with the name side up.
This is a fairly oversized mock up of a Galaxy S23 Ultra. The overall dimensions end up being 6.874" (174.59mm) Long x 3.7" (93.98mm) Wide x .7" (17.78mm) Thick. If you feel the need to, you should be able to scale it down to more appropriately fit where you want to use it.
I've included both a Step file and an STL file of the model. Model was made using FreeCAD.