YASKSKH: Yet Another Swiss Knife Style Key Holder

Yes this is another Swiss-Pocket-Knife-Style-Keyholder.
I did not find what I exactly wanted, so I designed my own, taking into account the hardware that I had available in my workshop (M3 screws with inbus hex heads and self locking nuts).

I uploaded the Fusion file, so that when you want something fitting your needs you do not have to start from scratch.

I also designed it in such way (width) that https://www.thingiverse.com/thing:3642254 (Shopping Cart Removable Coin) will fit in for Swiss and Euro Coins. I changed that design, because the double version did not work well in this key holder.

In my personal version I put in my Mobile Phone number, so when I loose my keys they can call me. Be sure though that the number you use is not registered or searchable in the internet, otherwise they know your address, what is a bad idea when they already have the keys to your home!

When you print the .STL file or modify and print the design via the Fusion file, please post and share it here.

Print instructions

Category: Keychains Summary

Yes this is another Swiss-Pocket-Knife-Style-Keyholder.
I did not find what I exactly wanted, so I designed my own, taking into account the hardware that I had available in my workshop (M3 screws with inbus hex heads and self locking nuts).

I uploaded the Fusion file, so that when you want something fitting your needs you do not have to start from scratch.

I also designed it in such way (width) that https://www.thingiverse.com/thing:3642254 (Shopping Cart Removable Coin) will fit in for Swiss and Euro Coins. I changed that design, because the double version did not work well in this key holder.

In my personal version I put in my Mobile Phone number, so when I loose my keys they can call me. Be sure though that the number you use is not registered or searchable in the internet, otherwise they know your address, what is a bad idea when they already have the keys to your home!

When you print the .STL file or modify and print the design via the Fusion file, please post and share it here.

Print Settings

Printer Brand: XYZprinting

Printer: da Vinci 1.0 Pro 3in1

Rafts: No

Supports: No

Resolution: 0.1 mm

Infill: 80%

Filament: Best Value ABS Snow white
Notes:

Printed at 240 C and bed temperature of 100C (is with my set up case approx 90C)

Post-Printing

Assemble the gadget with they keys you have in such way that you can "push" them out easily. With self locking nuts, you can tighten just enough to have some friction, but it is still easy to use.
I also put in a little PVC washer between some keys for friction and levelling between opposite keys.

After assembly you can cut the M3 bolts.

How I Designed This

With Fusion 360