1 / 5
Universal adapter for Soda bottle and Gardena coupling and rocket fins — image 1
1 / 5

Universal adapter for Soda bottle and Gardena coupling and rocket fins

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an adapter to put fins on a 0.5 - 2 liter soda bottle, as well as to mount a Gardena ¾ " faucet coupler.

Rating
0 / 5
Likes
19
Downloads
272
Makes
0
Views
1,996
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an adapter to put fins on a 0.5 - 1.5 liter soda bottle, as well as to mount a Gardena ¾ " faucet coupler.

You have to put a rubber gasket between the bottle and adapter. (Gardena has such in their product line). The Gardena part already has a rubber gasket and O-ring.

You can find a launcher based on the Gardena coupler here: https://www.thingiverse.com/thing:4368014

Print the coupler with 4 layer walls and 100% infill to make them air tight.
Also a bit of silicone grease will help. See also the post printing instructions.

I have uploaded 2 types of fins. Pick the largest for larger bottles.
Print the fins horizontally for max strength. (You could try to print the whole device at once, but strength will be much less. The fins will break during a rough landing because of the horizontal layers)

Be careful when you put pressure on. Keep your distance. Your bottle might explode.
I did not go over 40 PSI.
I also do not guarantee this design or will be liable for any accidents or damages!

 

Print Settings

Printer Brand: XYZprinting

Printer: da Vinci 1.0 Pro 3in1

Rafts: No

Supports: Yes

Resolution: 0.1 mm

Infill: 100%

Filament: Profil ABS Black (any color is OK) Post-Printing

Post processing

Carefully remove the supports and sand the adapter after printing. The inner surfaces must be smooth.

Also sand the opening for the fins minimally. The margins are tight.

Tags