DL24MP 300W Electronic Load
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for the DL24M electronic load. Powered with a 12V Barrel or 12V USB C PD Port. To mount the board in to…
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 195
- Makes
- 1
- Views
- 2,009
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
An enclosure for the DL24M electronic load.
Powered with a 12V Barrel or 12V USB C PD Port. To mount the board in to the enclosure you have to remove the green screw terminal housing or edit the cad file. All screws are mounted with brass inserts. Added a rotary encoder for convenient setup. Ive rotated the fans to blow the air up and not into the case, just to prevent the PLA I used from deforming. Use the 3d printed fan ducts to prevent recirculation of hot air within the fan and increase the airflow.
Try not to use the stl files, rather the 3mf as the format guarantees much more accuracy.
Here are the Aliexpress affiliate links to the hardware in this project:
Atorch DL24MP
Cheap DL24MP without fan
12V PD Adapter
DC Barrel Adapter
Banana Jack
Rotary Encoder
If you need a wiring diagram for the rotary encoder, you can use the pictures of this forum: https://vae-tech.forumactif.org/t254-dl24m-charge-active-testeur-de-batterie#2266
If you like my work, you can support me with a donation via paypal! Or use the affiliate links to show support without additional charge.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20
Notes:
Don't use supports in the honeycomb air vents, or you will have a bad time removing it.
Category: Electronics