steelseries Arctis Pro Wireless Headset - Spare Battery Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Straddles the top of your Arctis Pro Wireless headset base station and provides storage for two spare battery packs.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 1,334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I designed this model to hold a couple of spare battery packs for my steelseries Arctis Pro Wireless headset. It fits over the top of the base station so your spare battery packs are always handy. It should fit snugly and not require any tape or adhesive to hold it in place. It does not block the screen, battery charging port or the electrical\data ports on the back of the unit.
This model will not fit the newer steelseries Arctis Nova Pro wireless.
The battery pack type number is 160240 and measures 1.94" (49.4mm) Long x 1.33" (33.8mm) Wide x .23" (5.8mm) Thick.
The wireless base station this is designed for measures 4.24" (107.8mm) square.
I have included both versions of this model that I designed. One has a solid top if you prefer to add a logo or some writing. The other has some triangle shaped cutouts to save material and print time while still being more than strong enough for this application. They are both designed to be printed without needing supports. I would suggest orienting them as shown in this photo.
I would also suggest printing this with at least 3 perimeters\walls and a decently high infill percentage. Here are the settings that I used:
- .4mm nozzle
- .2mm layer height
- 5 perimeters
- 30% gyroid infill
I included both a STEP file as well as an STL file of each model version.