Internal lightstrip holder for BambuLab P1P / X1C

For those who are frustrated with the low light inside the BambuLab beast, and don't want a big and ugly square thing on the top of the glass, here is my solution.

It fits the metal sheet of the frame, just above the front door.

It won't interfer with the camera at all.

Printed in 3 parts in 1h50min.

Avoid PLA as it will soften when printing high temperature materials like POM or PA-CF.

Print it with PA-CF or anything heat resistant.

WARNING: This upgrade requires some electrical skills. I'm not responsible in case of damage or injury.

Here is the kind of compatible lightstrips, 2 solutions:

24V 8mm pcp width (important) lightstrip:

https://fr.aliexpress.com/item/1005002932247185.html?spm=a2g0o.order_list.order_list_main.20.161c5e5blnKKNN&gatewayAdapt=glo2fra

You will have to take the 24V from the power supply (26 screws to remove, good luck!)

OR

5V 8mm pcp lightstrip:

https://fr.aliexpress.com/item/1005005084332225.html?spm=a2g0o.order_list.order_list_main.10.161c5e5blnKKNN&gatewayAdapt=glo2fra

Here, you have to take the 5V from the AP board. 

Easy and your light will turn off with the stock one (not tested yet, but I'm confident).

Please share your prints ;)