Philips Avent baby monitor bracket for crib
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bracket to mount a baby monitor to a crib. Fits as-is with 20mm wide rails. Step and sldprt available for remix.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 0
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Simple bracket to mount a Philips Avent baby monitor to a crib rail.
Fits a 20mm rail by default, but I added both step and sldprt files so you can make it your own. Make sur you keep the spacing of the holes the same though (43mm) !
The fit is a little bit loose on the crib rail, as we wanted to be able to move it easily from corner to corner if we couldn't catch the baby on the camera. It holds very well nonetheless because it hugs the hole corner.
I used #8 x 3/4in screws. The hole is sized to 3mm so the threads bite directly in the plastic without inserts nor taping. Make sure your screws don't screw in more than 20mm long so as to not dammage the crib.
Printed in leftover clear PETG. PLA should be fine, as long as you have good layer adhesion (rising your temp a little might help).