Articulated Dragon
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.09 – €6.22 net (excluding VAT)
For file: AH_Articulated Dragon.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.65 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 6.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a simple print in place articulated dragon I made a while back
- Rating
- 5 / 5
- Likes
- 297
- Downloads
- 1,916
- Makes
- 4
- Views
- 13,706
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
print in place articulated dragon. includes support for upper teeth simply cut at the base of each tooth with scissors or flush cutters to free the support.
I also recommend using good bed adhesion options as the feet can come off the build plate easily.
the file has an uneven bottom so you will need to lower it slightly below the build plate!
the teeth and spikes can get a bit shaky towards the points if you have the print speed up higher and the teeth can be a bit wonky since they are so thin.