1 / 17
Raspberry Pi BMO Robot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BMO... irl
- Rating
- 0 / 5
- Likes
- 67
- Downloads
- 157
- Makes
- 0
- Views
- 2,401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I have a YouTube series documenting how I set it up. It should give you an idea, but keep in mind it was intended more to be entertaining than instructive.
https://www.youtube.com/playlist?list=PLHcXUO0tVZqc_A_hYahgxZOrVOI6vnqMH
I learned a few things while designing the previous version of this BMO.
- I did not account for thread tolerance.
- I did not account for speakers
- The screen I used was garbage
- The measurements were not very... mathematical.
I decided to make better one with the official 7" display from Raspberry Pi.
https://www.amazon.com/dp/B0153R2A9I/ref=cm_sw_em_r_mt_dp_N96F2MPQCM1RKRW3N739
I used ABS for the body because I was concerned about heat generated by the Pi, but since the chassis and faceplate are such large prints, warping was an issue. I used an adhesive and the force was so strong that it contracted and brought the print bed with it. If I were to print another one, I would likely try PLA+ or some other material that offers heat resistance but is less prone to warping than ABS.