Sovol SV04 Large Purge Bucket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The stock purge buckets on the SV04 are way too small. These are several times larger.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 98
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Files are for the right side. Mirror for the left of course. These hole several times as much purge material so they don't have to be emptied near as often. Clean-out via doors on the sides so you can empty anytime.
The brush holder is another listing of mine.
https://www.printables.com/model/410140-wire-brush-holder-for-sovol-sv04-purge-bucket
The purge bucket reuses all the original hardware.
The brush holder attachment will require 2 m3 bolts at least 10mm long and nuts.
Everything prints without supports when in the right orientation which is how they should load. Then as long as your layer height to perimeter width ratio isn't too high, it will print well.