1 / 3
Voron Trident Top Mount Raspberry Pi Style Wide Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A camera mount for monitoring print on Voron Trident.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 113
- Makes
- 2
- Views
- 1,409
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Print with ABS/ASA as it mounted within the chamber no support required. Simple print, slide in camera.
To cable manage the flex cable, high temp double tape or kapton tape.
Does not require you remove top panel to install, just pre-route cable loom to camera from bottom.
Hardware BOM:
1x M3 T-NUT
1x M3x12 Bolt
Camera/Cable Bom: For Trident LDO 300 Cube, you may get away with shorter flex cable for smaller volume. (With Inverted Electronics, you may need longer CSI cable 1.5mm or 2m)