Glider with cloud stand

This is a remix of flok's nice “Glasflügel H-201B, Libelle” sailplane, and added a stand.

I modified a bit the model because I wanted to have the Canopy with a different color from the fuselage without having to paint it, so I split it.

Personally, I scaled it up to 150% to have a wingspan of almost 50 cm (36.9 cm originally).  

Esthetically, I removed the little triangles at mid-wing (also easier to print), and removed the  little wheels at wing tip (my preference) to leave a clean wing. 

For assembly, I suggest you begin by the “Canopy” and second, the “Elevator” at the tail, because this one will give you a nice square as reference when gluing the wings. I would suggest glueing the 2 wings at the same time to find the best dihedral angle. 

For the stand, I wanted something from under and the less visible as possible, so I came with the idea to sit it on a cloud.  

The fuselage is held on a “Fuselage_Clamp” which is tilted at 35° and can rotate 360° on it's “Pivot_Base”, and this one as to be glued at the back of the “Cloud”, at the highest point of this one. And as low as possible (for the look).

To prevent it from accidentally falling of it's “Clamp”, I suggest tying it with some sewing thread, by hiding the knot under. From the top you will only see 2 small white lines. Or you could glue it. If you do not, In any case he PLA clamp will come loose, and it will easily fall of its place.

The “Cloud” as to be glued on its flat base ("Base_For_Cloud"). 

Personally I put it on the top of a monitor (27" curved), and provided the file in case someone wants to use it or modified it.

Happy printing.