Insert Remover - Honeycomb Wall (HSW)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Tool to remove Inserts (hollow) from the Honeycomb Wall
- Rating
- 4.802 / 5
- Likes
- 1,356
- Downloads
- 6,769
- Makes
- 114
- Views
- 16,961
- Reviews
- 101
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed.
So I designed a removal tool. Stick the tool in the inner hex from the insert and press the hooks on both sides until they click in. Now lever the tool up and down and pull the insert out.
When the insert is removed, you kann push the tool trough the insert.
Print-Settings:
- PLA
- 0.2mm
- Shells 4
- Infill 50%
- Support: Yes, Bed only
STEP-File is provided. Fill free to remix it.
If you print the tool and find it helpfull, please hit Like and rate it. Thank you!