1 / 7
Blum 561 jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blum 561 jig to make drawers for 561 slides.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 62
- Makes
- 0
- Views
- 1,608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This jig is compatible with Blum 561 slides commonly found in Ikea bathroom cabinets.
To use the jig, you will need to make a drawers based on the slides you have. You can find design notes here: https://publications.blum.com/2020/catalogue/en/436/ Then you will need to mark, from the back, x2 on the drawer bottom. You can use the line to align the jig as shown in the photos.
I printed the jig using PLA in 0.3 mm draft mode. I had to enlarge the holes a bit using 6 mm and 8 mm drill bits. I made 4 drawers with the jig with great success.