1 / 4
Ikea Elvarli Helmet hook/holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helmet Holder for the Ikea Elvarli shelves system
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 54
- Makes
- 0
- Views
- 821
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Helmet holder for the Ikea Elvarli shelves system.
Print settings
Print in PETG or stronger filament for durability, with these settings (or stronger):
(calculated on a 0.4mm nozzle)
- 4 walls
- 0.2 layer height - 5 top and 5 bottom layers
- 15% infill
- No supports required
Orient the pieces on the bed as in the picture.
The entire print requires about 50 meters of filament (150 grams using PETG) using these settings.
Do not print in PLA, as it becomes brittle with continuous loads.
Required Hardware
- 4 x M5 threaded heat inserts https://amzn.to/3nm1Dgh
- 4 x M5x16mm Hex drive rounded head screws https://amzn.to/3LOuWBn