Ender 3 S1 Pro Sprite Extruder cooling solution
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reworked mount for the Sprite extruder with better cooling (less noisy)
- Rating
- 4.833 / 5
- Likes
- 179
- Downloads
- 783
- Makes
- 8
- Views
- 6,712
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I made a new fixture for the extruder and ABL sensor that fits the Ender 3 S1 Pro. The original 4010-part cooling fan is used to cool the cold end now.
You have to adjust the ABL sensor offset before using this mod.
X-axis offset: -47.7mm
Use Pronterface or Similar to connect to your printer and type "M581 X-47.7mm" in the command prompt. Use "M500 to save the setting.
You have to source two 5015 blower fans and 4x M4x20 screws for the part cooling fan duct.
Original design of the fan duct by Sorkin: https://www.thingiverse.com/thing:5511666
.stp and .f3d files are included if you want to modify the design.