Phone Stand - Horizontal/Landscape
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.16 – €1.42 net (excluding VAT)
For file: phonestand-stand_03mm_pla_mk3s_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.29 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
There are lots of phone stand prints available, but none of them quite worked the way I wanted, which was to hold the…
- Rating
- 4 / 5
- Likes
- 14
- Downloads
- 157
- Makes
- 0
- Views
- 878
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
Addendum (January 2026) : In response to a comment ("the bottom lip that holds the phone is not quite wide enough") I added a second version (V02) with a wider lip.
There are lots of phone stand prints available, but none of them quite worked the way I wanted, which was to hold the phone sideways (or horizontal, or landscape if you prefer), and slightly elevated. I wanted to be able to place the phone on my desk between my keyboard and monitor, and hold it at an angle where I could easily keep an eye on the phone screen.
Although I did not remix any previous phone stand prints, I did get some good ideas from looking at what others have done. I was able to quickly design this stand and print it out with the idea that I could replace a "quick and dirty" design with something better later, but it actually turned out better than I expected, and the print quality was quite good despite being printed in 0.3mm "draft mode."
In case you're wondering why I need this : I recently installed a camera on the front of my house so I could keep an eye on my front yard/driveway while working in my windowless basement home office.
The OnShape 3D CAD files for this are here :
Print instructions
Print in PLA using the 3mf file provided; otherwise :
0% infill
no brim or supports required
I printed in 0.3mm layer height "draft mode" to speed up the print time, and the print quality was very good.
Print on the side as shown in the photos.