1 / 3
Raceway
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
A raceway for
Print instructions
| Raceway! | |
| A raceway for https://www.prusaprinters.org/prints/46970-build-and-have-fun-2 See also https://www.prusaprinters.org/prints/46972-raceway-60 See also the raceway scaled to 60% to fit common metal toy cars. | |
| File | Comment |
| Angle Link 0.stl | A link to a conversion link |
| Angle Link 10.stl | A link to a conversion link, 10% angle |
| Angle Link 15.stl | A link to a conversion link, 15% angle |
| Angle_GlueLink_0.stl | A link to a conversion link, to be glued with below |
| Angle_GlueLink_10.stl | A link to a conversion link, 10% angle, to be glued with below |
| Angle_GlueLink_15.stl | A link to a conversion link, 15% angle, to be glued with below |
| Link.stl | A link to the raceway for low angle |
| LinkMedium.stl | A link to the raceway for medium angle |
| LinkLong.stl | A link to the raceway for high angle |
| M8 Bolt 45mm.stl | M8 bolt 45mm |
| M8 Bolt 55mm.stl | M8 bolt 55mm |
| M8 Nut Scale to 106.stl | M8 nut, NOTE! Scale it to 106% for X and Y in the slicer |
| Raceway 1of24 REVERSE.stl | A curve with connections vice/versa |
| Raceway 1of24.stl | An ordinary curve to build the raceway |
| Raceway Conversion.stl | Conversion piece, see angle links |
| Raceway Driveway Part 1.stl | Part one of the driveway |
| Raceway Driveway Part 2.stl | Part two of the driveway |
| Raceway straight.stl | A straight piece of road |
| RacewayHolder.stl | An angle holder for the straight raceway piece |
| RacewayHolderCurve.stl | An angle holder for the curved raceway piece |
| RacewayHolderBase30.stl | A base for the raceway holder 30mm |
| RacewayHolderBase40.stl | A base for the raceway holder 40mm |
| Notes | |
|
Compatible with https://www.prusaprinters.org/prints/40925-raspberry-pi-case-for-camera-with-flexible-stand |
|
| More Notes | |
| I have experienced that different filaments have different properties. Sometimes the pins fits the holes, sometimes too tight and sometimes to loose. You have to try yourself. if it wont fit in one way it may fit in another. You may have to "exercise" the parts. Anyway, Have fun! | |