1 / 2
Horse stirrup
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My own designed Horse Stirrup. One day, not that long ago. I ended up in a horse-shop.
- Rating
- 4.833 / 5
- Likes
- 56
- Downloads
- 487
- Makes
- 5
- Views
- 2,534
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My own designed Horse Stirrup.
One day, not that long ago. I ended up in a horse-shop. When browsing I saw a stirrup made out of plastic. In that time and place I got the idea of this design.
At the moment we are in Beta with our design.
The design V3.5 is succesfully tested with a 200Kg load and is daily used for over 3 months now (nov 2020). V5 is a refinemend from Feedback by the users:
No sharp edges anymore, better grip and owner-tag are added.
Print instructions
Printing in PLA (see Purple foto) or PETG (See bleu photo).
PETG
- Printer: Original Prusa MK3S
- Slicer: PrusaSlicer-2.2.0
- Print settings: 0.15mm QUALUITY
- Fillament: Generic PETG
- Support: Support on build plate only
- Infill: 25%
- Print Settings: Layers and Perimiters
- Vertical shells: Perimiters: 5 (minimum)
- Horizontal shells: Top:5, Bottom:5
Minimum shell thickness: 0.75mm
- Print Settings: Infill
- Infill density: 25%
- Fill pattern: Rectilinear
- Print Settings: Support material
- Contact Z distance: 0.2mm