SPDT Rocker Switch Support Faceplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spdt rocker switch faceplate used to install rocker switches in a 24mm Neutrik style screw layout.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a support plate/faceplate that you can snap a SPDT rocker switch on to, and then screw the plate into a Neutrik layout screwhole.
I used this for an arcade stick spdt switch (tourney lockout, socd switching etc).
This was modeled in TinkerCad, I measured my switch using Vigniere calipers and used the measurements in the model. Depending on your calibration (and your switch quality) you may need to increase or decrease the thickness of the plate to securely snap the switch in.
It was able to fit inside a Neutrik bumper support if that's your usecase as well.