Parametric Kleenex Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily change the size and style using parameters in the included Fusion 360 file
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 54
- Makes
- 0
- Views
- 568
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
I wanted a way to show off my plate textures, like my new PET plate, on all sides of the box. Parts are printed separately and the box is glued together. Two styles are included, one with support posts (V2) and one without (V1). You can configure the design to match almost any size kleenex box using parameters in the Fusion file. The included stl's are 230x125x90, but you can make them any size you want. To print either V1 or V2 toggle the visibility of the desired version in Fusion and export the top and side stl's. Parameters are as follows:
Length = Actual length of the box in mm
Width = Actual width of the box in mm
Height = Actual height of the box in mm
OvalLength = Major axis of the opening in the top
OvalWidth = Minor axis of the opening in the top. Set them the same for a round hole
Thickness = Thickness of the walls
Print one Top and two of each of the sides. I used PLA at .2mm, no supports, brim optional.