1 / 6
Adimlab Dual Drive Extruder Coolers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the part cooler and radiator cooler for the dual driver extruder with all metal E3D V6 hotend.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is the part cooler and radiator cooler for the dual driver extruder with all metal E3D V6 hotend.
Print Settings
Printer:
Adimlab
Rafts:
No
Supports:
Yes
Resolution:
0.2
Filament: Solutech PLA Black
Notes:
Use tree supports in CURA and select "only touching build plate"
These coolers are designed for use with a UBL mount. If install without a UBL mount, I suggest a thin spacer. This system uses 2 50x15 blower fans.Side Note: Blower fans tend to come with the red and black wire reversed for our printer. Double check and swap wires in needed before connecting fan or you will instantly burn up your fan.
Category: 3D Printer Parts