1 / 4
Closetmaid Super Slider for generic shelving
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 116
- Makes
- 1
- Views
- 914
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving.
Print instructions
Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance.
Link to source OnShape 3D model is available.
When installing, insert the small end through the front face of the shelving, rotate all the way to the snap end. Snap the bottom first, then the top. Lastly snap the rod in.
Home Depot sells the closet rod in varying lengths. Look for "SuperSlide White Closet Rod" (link)