Hot Wheels Diecast 1:64 Scale Wheel Chocks
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: HW Chocks-ChockB_0.2mm_PLA_MK3S_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hot Wheels / Matchbox 1:64 scale wheel chocks for displaying diecast cars & stop them from moving on unlevel surfaces.
- Rating
- 5 / 5
- Likes
- 244
- Downloads
- 1,296
- Makes
- 10
- Views
- 5,303
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print!
HW Chocks-ChockA is easier to print and comes off the build plate very cleanly.
HW Chocks-ChockB uses slightly less filament but is a little harder to remove from the build plate without bending.
Neither design requires a brim.
The .gcode is included to make it super easy to print.
Need more Hot Wheels? Check out my collection!
