1 / 8
IKEA Kvartal Slider Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the clip to the slider in the IKEA Kvartal system (not longer produced by IKEA).
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 364
- Makes
- 1
- Views
- 1,909
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
Replacement for the clip to the slider in the IKEA Kvartal system (not longer produced by IKEA).
Latest Update:
2022 Feb: Additional tweaks to increase stability
Print instructions
- Material: PLA or PETG
- Layerheight: 0.15 mm
- Nozzle: A finer Nozzle with diameter 0.3 mm or 0.25 mm is beneficial for the small details, but 0.4 mm works too
- Infill: 100%
- Orientation: I suggest printing as in STL-File (flat side down) with supports.