Extended Barrels and Muzzle Upgrades for Foam Knight XC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PRINT IN BRIGHT COLORS IF GOING TO BE USED IN VIEW OF PUBLIC Extended Barrel shroud for Mega configurations. Extended…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
PRINT IN BRIGHT COLORS IF GOING TO BE USED IN VIEW OF PUBLIC
Extended Barrel shroud for Mega configurations.
Extended Barrel for Elite configurations also allows for use of Demolisher rockets.
Muzzle for launching of Nitro cars, Made for a laugh, Launch with either a rival round from the magazine or with TP stuffed into the narrow end of muzzle to act as wadding.
All above can be printer vertically with no supports.
Uses original hardware but requires extended inner barrels.
Shell Holder allows for the stock Elite Muzzle to be replaced, Holder allows the use of Spring Thunder compatible shells. Fire with an empty chamber. Uses stock screw and nut, O ring needed is 116. Print upright with support from bed only.
PRINT IN BRIGHT COLORS IF GOING TO BE USED IN VIEW OF PUBLIC
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Category: Hobby