3020 Pro Max 65mm Spindle Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 65mm diameter spindle mount that replaces the original 52mm mount on the Sainsmart Genmitsu 3020 Pro Max CNC…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 142
- Makes
- 1
- Views
- 950
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
A 65mm diameter spindle mount that replaces the original 52mm mount on the Sainsmart Genmitsu 3020 Pro Max CNC router... The new mount uses all the original hardware.
It is designed primarily to be used with the Makita 700/701/702 palm router, but any 65mm diameter spindle motor will fit.
Printed using PETG, but PLA will be more than enough for a strong print.
Printed using Cura 5.1, with 2mm wall, top and bottom thickness. I'd recommend using anywhere from 40% gyroid infill, up to 100%.
The rear holes for the M3 grub screws, along with the side holes where the acrylic limit switch plate attaches. Can be tapped if needed, or screwed directly into.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
40% to 100%
Filament: Any Any Any
Notes:
0.2mm layer height
2mm walls
2mm top/bottom layers
40% to 100% infill (gyroid)
Supports (optional)
Brim - 5mm (optional)
Category: 3D Printing