Sonoff Touch EU double JUNG frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my first approach on creating a basic frame, fitting a JUNG design combined with a Sonoff touch EU version. Be…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 1
- Views
- 443
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is my first approach on creating a basic frame, fitting a JUNG design combined with a Sonoff touch EU version.
Be careful to configure your printer for best dimensional accuracy, since the inner socket frame is exactly 1mm larger than the actual socket. So if you're off by 0.5mm, you might have problems sliding the socket in.
If you flashed the T1 with Tasmota and expirience the very bright blue LED behind the wifi symbol:
- open Tasmota config page
- enter SaveData 1
- LedState 0
- SaveData 0
CHANGELOG:
- 2019-02-01: Small fix for inner socket frame sizing
- 2019-01-31: Strengthened the walls of the socket frame
- 2019-01-30: Minor fixes, added inner frame to sonoff frame, cleaned up design
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 20%
Filament: dasfilament.de PETG
Notes: Infill between 20-25% works just fine. Speed in general is ~50mm/s max