Squash ball feet for reittec polished
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Squash ball feet for reittec polisher. It acts as vibration dampers, which reduce noise and improve stability of the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Squash ball feet for reittec polisher. It acts as vibration dampers, which reduce noise and improve stability of the polisher.
Just insert standard squash ball in each foot (I used 1 white dot ball, but any other should work too), and secure the foot on the base using an M3 screw with a large washer (on mine, I used 2 washers per foot: a M3 and a M4).
Foot is provided in 3 variants :
- with a M3 heat-set insert (I used these: https://www.amazon.fr/gp/product/B07YSRGZ9N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
- with M3 screwed directly in the plastic
- with a M3 nut
On my polisher, I used heat-set insert versions.
The 2 other versions where not tested, but should work.
Print Settings
Printer:
Alfawise U20
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1
Infill:
40%
Notes:
Print as provided: top-bottom. It needs support (25%), and I strongly recommend a brim.
With these parameters, it print easly.
Category: DIY