TS100 soldering iron 19V PSU pegboard mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegboard mount for a 19V 2.1A power supply, like this one. Tested on the EU version of the PSU, but should also works…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pegboard mount for a 19V 2.1A power supply, like this one.
Tested on the EU version of the PSU, but should also works for the US version (please confirm if you test it).
Designed for the TS100 soldering iron PSU, but should also work for any unit with the same dimensions: 54.7mm x 39.9mm x 90mm.
Fit a pegboard with 4mm holes, 25.4mm/1inch holes distance, 3mm tickness.
STEP file is included.
Print Settings
Printer:
RenRen3D Pro (Kossel XL)
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
40%
Notes:
It should be printed top-bottom, as in the supplied STL file.
Category: Electronics