TS100 Soldering Iron PSU Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TS100 Soldering Iron PSU Case. The two case parts are printed at 0.2 layer height with 4 walls 4 top and bottom layers…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 369
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
TS100 Soldering Iron PSU Case.
The two case parts are printed at 0.2 layer height with 4 walls 4 top and bottom layers and 20% infill. Support required for openings. Change as required for your needs.
Case has optional mount position for a 4010 24v fan if you find the PSU heatnig up otherwise the case is well ventilated.
BOM
6x M3x4x5mm heat set brass inserts
2x M3x6mm BHCS (PSU)
4x M3x8mm BHCS or SHCS
1x GX16-2pin
1x IEC 240v Fused Male Power Plug with Switch
1x KCD1 Rocker Switch 250VAC 10A With Led Light
1x Mean Well 24v 3.2A 75w PSU. Model Number LRS-75-24
4x Rubber feet
Some wiring and connectors.
TS100 comes with power cable that you solder onto the GX16 2 pin connector.
Works for me.
Please consider a donation to help support my designs.
PayPal.Me/RedWhere2020
Category: Hobby