1 / 5
Parametric rainwater collector / harvester 60-120mm gutter downspout
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take on a rain water collector. It's designed in FreeCAD and the dimensions are adjustable.
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 126
- Makes
- 0
- Views
- 1,298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
This is my take on a rain water collector. It's been in use for 2 weeks now and works just fine.
The 3mf and gcode files here are for a 100mm pipe with a 54mm hole in the side and a hose with 33mm diameter.
The FreeCAD model is adjustable (within reason) by just typing in the parameters in the table named “D” for dimensions. Best check the middle part of the video.
FreeCAD advice:
- you may need to have the “Fasteners” Addon installed
- pick the pipe, holesaw and outlet diameter as you need them
- remember to check the chamfer after you make a change
Printing advice:
- use 0.6mm nozzle
- use PETG or something else resistant to UV light. It's used outside after all
Installation advice:
- if your rainwater tank does not have an overflow, mount the collector below the maximum desired water level, but still above the inlet :)
Enjoy.
Check the video for installation and adjustment instructions: